Charging Port Snow Cover for Hyundai Tucson PHEV (2022-2026)

Keep Snow and Ice Away From Your Charging Port

Winter charging can leave your charging port and connector exposed to snow, freezing rain and ice for hours at a time.

The YURIK Charging Port Snow Cover is designed specifically for the HYUNDAI Tucson PHEV. It shields the charging-port area and extends over the charging handle, helping reduce snow and ice buildup while your car is plugged in.

Why You'll Like It

• Vehicle-specific fit — designed for the Hyundai Tucson PHEV, not a universal cover
• Extended protection — shields both the charging-port area and charging handle
• Helps reduce snow and ice buildup during outdoor winter charging
• Secure sliding lock — helps keep the cover firmly in position
• Visible charging status — a transparent viewing area lets you check the charging indicator without removing the cover
• CCS1 & CCS2 versions — available for North American and European charging-port configurations
• PETG construction — the entire cover is 3D printed from PETG
• Made in the EU — designed and manufactured by YURIK Accessories

Designed for Winter Charging

Install the cover over the charging-port area, secure it in place, and then connect your charging cable.

The extended hood helps shield the charging connection and charging handle from falling snow and freezing precipitation while the vehicle is plugged in.

A transparent viewing area keeps the vehicle's charging-status indicator visible, so you can check the charging status without removing the cover.

Compatibility

Designed for 2022-2026 models of:

• Hyundai Tucson

Choose the Correct Version

USA / Canada — CCS1
Choose this version for compatible North American vehicles equipped with a CCS1 charging port.

EU / UK — CCS2
Choose this version for compatible European and UK vehicles equipped with a CCS2 charging port.

Please select the correct charging-port version for your vehicle when ordering.

Installation

No tools, drilling or permanent vehicle modifications are required.

1. Open the vehicle's charging-port door.

2. Position the snow cover over the charging-port area.

3. Secure the cover using the sliding lock.

4. Insert the charging connector through the cover and fully into the vehicle's charging port.

5. Confirm that the charging connector is properly inserted and charging has started.

6. Check the charging status through the transparent viewing area.

When charging is finished, disconnect the charging cable and remove the snow cover before driving.

Material & Manufacturing

The entire cover is 3D printed from PETG, including the integrated sliding locking mechanism.

PETG is well suited to functional exterior applications because of its durability, impact resistance and resistance to moisture.

Material: PETG
Manufacturing method: 3D printing
Designed by: YURIK Accessories
Manufactured in: European Union

Because this is a 3D-printed product, minor layer lines and other surface characteristics associated with the printing process may be visible. These are normal and do not affect the intended function of the product.

Important Information

This accessory is designed to provide additional protection from snow, ice and freezing precipitation while your vehicle is parked and charging. It does not make the vehicle's charging system waterproof or guarantee that ice cannot form under all weather conditions.

Make sure the charging connector is fully inserted and properly locked before leaving the vehicle unattended.

Do not use the cover if it is cracked, damaged, deformed or cannot be securely positioned. Heavy snow or ice accumulation may require additional clearing around the charging area.

Always remove the snow cover before driving.

Always follow the instructions and safety information provided by your vehicle and charging-equipment manufacturers.

YURIK Accessories is an independent aftermarket-accessory manufacturer and is not affiliated with or endorsed by Hyundai Motor Company. Hyundai and its vehicle model names are trademarks of their respective owners and are used solely to identify vehicle compatibility.

Die meisten Artikel werden innerhalb von 2–7 Tagen versandt; manchmal benötigen wir jedoch etwas mehr Zeit, um Ihre Bestellung anzufertigen und fertigzustellen. Wir übernehmen keine Haftung für Verzögerungen beim Zoll.

Dieses Produkt ist ein nicht-elektrisches Kfz-Zubehörteil, das für den Innen- und Außenbereich von Fahrzeugen entwickelt wurde. Es wird nicht an das elektrische System des Fahrzeugs angeschlossen, sofern dies nicht ausdrücklich in der Produktbeschreibung angegeben ist, und enthält keine elektronischen Bauteile. Verwendungszweck: Dieses Produkt ist für die Verwendung mit den auf dieser Produktseite aufgeführten Fahrzeugmodellen konzipiert, um Komfort, Ordnung und Schutz während des normalen Fahrzeugbetriebs oder Ladevorgangs zu verbessern. Materialinformationen: Hergestellt aus robusten Kunststoffen (einschließlich PETG, PLA und/oder TPU), die für den Einsatz im Automobilbereich ausgewählt wurden. Sicherheitshinweise: Kein Spielzeug. Außerhalb der Reichweite von Kindern aufbewahren.

Nicht verwenden, wenn beschädigt, rissig oder verformt.

Stellen Sie sicher, dass das Produkt die Fahrzeugbedienelemente, Sensoren, Airbags oder Ladeanschlüsse nicht beeinträchtigt.

Entfernen Sie das Produkt, wenn es die sichere Fahrzeugbedienung beeinträchtigt.

Befolgen Sie stets die Anweisungen des Fahrzeugherstellers.

Kompatibilität:

Kompatibel nur mit den in der Produktbeschreibung explizit aufgeführten Fahrzeugmodellen. Nicht für andere Fahrzeuge geeignet.

Hersteller / Verantwortlicher Wirtschaftsbeteiligter (EU):

YURIK Accessories

E-Mail: info@yurikaccessories.com