Sunglasses & Small-Item Tray for VW ID.4 (2023–2026 US/Canada)

Put That Unused Space to Work

Keep your sunglasses and everyday essentials within easy reach with the YURIK Sunglasses & Small-Item Tray, designed specifically for 2023–2026 US and Canadian Volkswagen ID.4 models.

The tray adds useful storage above the center console without requiring drilling or permanent modification. A soft lining provides a more protective surface for sunglasses, while the tray is also useful for other small items you want to keep close at hand.

Why You'll Like It

• Designed specifically for the VW ID.4 — shaped for 2023–2026 US and Canadian models
• Convenient everyday storage — ideal for sunglasses and other small items
• Can hold two pairs of sunglasses
• Soft-lined interior — provides a gentler surface for eyewear and other belongings
• Secure installation — attaches to the centre console using double-sided adhesive
• No drilling or tools required
• PETG construction — 3D printed for use inside your vehicle
• Made in the EU — designed and 3D printed by YURIK Accessories

Made for Everyday Convenience

The ID.4 has plenty of interior space, but small everyday items don't always have an obvious place to go.

This tray turns otherwise unused space around the centre console into convenient storage for items such as sunglasses, keys, coins or other small belongings.

Its open design keeps frequently used items easy to see and reach.

Compatibility

Designed specifically for:

Volkswagen ID.4 — US and Canadian models, model years 2023–2026

This version is designed for the centre-console configuration used in these vehicles.

Have a 2021–2022 US/Canadian ID.4 or European ID.4/ID.5?
See our tray designed for that center-console configuration. Click the link

Installation

No drilling or tools are required.

1. Clean and dry the mounting area on the centre console.
2. Check the tray position before removing the adhesive backing.
3. Remove the backing from the double-sided adhesive.
4. Position the tray carefully and press it firmly into place.

5. Allow the adhesive to establish a secure bond before placing items in the tray.

For best adhesion, install the tray on a clean, dry surface.

Material & Manufacturing

The tray is 3D printed from PETG and finished with a soft interior lining.

Tray material: PETG
Interior: Soft protective lining
Installation: Double-sided adhesive
Manufacturing method: 3D printing
Designed by: YURIK Accessories
Manufactured in: European Union

Because this is a 3D-printed product, minor layer lines and other surface characteristics associated with the printing process may be visible. These are normal and do not affect the intended function of the product.

Important Information

Install the tray only in the intended position and make sure it is securely attached before driving.

Do not overload the tray or place objects in it that could interfere with vehicle controls or become hazardous during sudden braking or an accident.

Do not use the product if it is cracked, damaged, deformed or no longer securely attached.

YURIK Accessories is an independent aftermarket-accessory manufacturer and is not affiliated with or endorsed by Volkswagen AG. Volkswagen and ID.4 are trademarks of their respective owners and are used solely to identify vehicle compatibility.

La plupart des articles sont expédiés sous 2 à 7 jours ; cependant, il arrive que nous ayons besoin d'un peu plus de temps pour préparer et finaliser votre commande. Nous ne sommes pas responsables des retards dus aux douanes.

Ce produit est un accessoire automobile non électrique conçu pour une utilisation intérieure ou extérieure. Il ne se connecte pas au système électrique du véhicule, sauf indication contraire dans sa description, et ne contient aucun composant électronique .

Utilisation prévue :

Conçu pour être utilisé avec les modèles de véhicules spécifiques répertoriés sur cette page produit afin d'améliorer la commodité, l'organisation ou la protection pendant le fonctionnement ou la charge normale du véhicule.

Informations sur le matériau :

Fabriqué à partir de matériaux plastiques durables (notamment PETG, PLA et/ou TPU ), sélectionnés pour une utilisation dans le secteur automobile.

Informations de sécurité :

• 
  Ceci n'est pas un jouet. Tenir hors de portée des enfants.
  
• 
  Ne pas utiliser si endommagé, fissuré ou déformé.
  
• 
  Assurez-vous que le produit n'interfère pas avec les commandes du véhicule, les capteurs, les airbags ou les connecteurs de charge.
  
• 
  Retirez le produit s'il affecte la sécurité de fonctionnement du véhicule.
  
• 
  Suivez toujours les instructions du constructeur du véhicule.
  

Compatibilité:

Compatible uniquement avec les modèles de véhicules explicitement mentionnés dans la description du produit. Ne convient pas aux autres véhicules.

Fabricant / Opérateur économique responsable (UE) :

Accessoires YURIK

Les acheteurs sont responsables des éventuels frais de douane et taxes d'importation. Je ne suis pas responsable des retards dus aux douanes.

Yuri is a designer and maker based in the Netherlands who started YURIK Accessories in 2021 after spotting an unused space under the central console of his VW ID.4 — and deciding to do something about it. What began as a 3D-printed tray shared in an owner community has grown into a range of precision accessories shipped worldwide. Every product is designed and 3D-printed with the same hands-on attention to detail that started it all.