Siirry tuotetietoihin
1 / 4

Rear Under-Seat Air Vent Guards for Ford Explorer EV & Capri EV (Set of 2)

Rear Under-Seat Air Vent Guards for Ford Explorer EV & Capri EV (Set of 2)

Keep crumbs, coins, and small objects out of the rear under-seat air vents in your Ford Explorer EV or Capri EV. These discreet, vehicle-specific vent guards help prevent debris from entering hard-to-clean ventilation openings.

Set of 2 | Snug fit | Durable PETG | Made in EU

Make :  Ford

Model : Explorer EV ja Capri EV

Year     :  2024, 2025, 2026 ja 2027

Normaalihinta €9,99 EUR
Normaalihinta Alennushinta €9,99 EUR
Alennusmyynti Loppuunmyyty
Toimituskulut lasketaan kassalla.

SKU-koodi:

Täydelliset tuotetiedot

Protect Your Air Vents from Everyday Debris

Dropped coins, food crumbs, and small objects can easily find their way into the rear under-seat air vents of your Ford Explorer EV or Capri EV.

Once inside, they can be frustrating to retrieve.

YURIK Under-Seat Air Vent Guards provide a simple, discreet solution to help keep unwanted objects out of your vehicle's ventilation system.

Why You'll Like Them

  • Helps prevent debris buildup – Keeps coins, crumbs, leaves, and other small objects from entering the vents.
  • Vehicle-specific design – Shaped to fit snugly around the rear under-seat air vent openings.
  • Minimalist appearance – Blends discreetly into the vehicle interior.
  • Open grille design – Provides a protective barrier while allowing air to pass through.
  • Set of 2 – Includes guards for both rear under-seat vents.
  • Durable PETG construction – 3D-printed from heat-resistant PETG plastic.

Vehicle Compatibility

Designed for:

  • Ford Explorer EV: 2024–2027
  • Ford Capri EV: 2024–2027

For the European-market electric models.

Package includes: 2 protective air vent guards.

Materials & Manufacturing

Made from durable PETG thermoplastic, selected for its toughness and heat resistance.

Designed and 3D-printed by YURIK Accessories in the Netherlands.

Minor surface variations and visible layer lines are normal characteristics of the 3D-printing process.

Installation & Care

Fit each guard securely over its corresponding rear under-seat vent opening. Check that the guard sits correctly and does not obstruct the surrounding trim.

Periodically inspect the guards for trapped debris. Clean with a damp cloth and mild soap when necessary.

Do not use if cracked, damaged, or deformed. Do not block the grille openings with other objects.

Important Information

This product is an independent aftermarket accessory and is not an original Ford component.

YURIK Accessories is not affiliated with or endorsed by Ford Motor Company. Ford, Explorer, and Capri are trademarks of their respective owners and are used solely to identify vehicle compatibility.

Toimitus ja palautukset

Useimmat tuotteet lähetetään 2–7 päivän kuluessa; joskus tarvitsemme kuitenkin hieman enemmän aikaa tilauksesi tekemiseen ja viimeistelyyn. Emme ole vastuussa tulliviiveistä.



Turvallisuus- ja käyttötiedot

Tämä tuote on ei-sähköinen autolisävaruste, joka on suunniteltu ajoneuvon sisä- tai ulkokäyttöön. Se ei kytkeydy ajoneuvon sähköjärjestelmään, ellei tuotekuvauksessa nimenomaisesti mainita, eikä se sisällä elektronisia komponentteja.

Käyttötarkoitus:

Suunniteltu käytettäväksi tässä tuotesivulla lueteltujen tiettyjen ajoneuvomallien kanssa parantamaan mukavuutta, järjestelyä tai suojaa ajoneuvon normaalin käytön tai latauksen aikana.

Materiaalitiedot:

Valmistettu kestävistä muovimateriaaleista (mukaan lukien PETG, PLA ja/tai TPU), jotka on valittu autokäyttöön.

  • Turvallisuustiedot:
  • Ei lelu. Säilytä lasten ulottumattomissa.
  • Älä käytä, jos tuote on vaurioitunut, haljennut tai epämuodostunut.
  • Varmista, että tuote ei häiritse ajoneuvon ohjaimia, antureita, turvatyynyjä tai latausliittimiä.
  • Poista tuote, jos se vaikuttaa ajoneuvon turvalliseen käyttöön.
  • Noudata aina ajoneuvon valmistajan ohjeita.

Yhteensopivuus:

Yhteensopiva vain tuotekuvauksessa nimenomaisesti lueteltujen ajoneuvomallien kanssa. Ei sovellu muille ajoneuvoille.

Valmistaja / Vastuullinen taloudellinen toimija (EU):

YURIK Accessories

Sähköposti: info@yurikaccessories.com

Tulli- ja tuontiverot

Ostajat ovat vastuussa mahdollisista tulli- ja tuontiveroista. En ole vastuussa tullien aiheuttamista viivästyksistä.

Tietoja valmistajasta

Yuri on hollantilainen suunnittelija ja valmistaja, joka perusti YURIK Accessoriesin vuonna 2021 havaittuaan käyttämättömän tilan VW ID.4:nsä keskikonsolin alla – ja päätettyään tehdä asialle jotain. Se, mikä alkoi omistajayhteisössä jaettuna 3D-tulostettuna tarjottimena, on kasvanut maailmanlaajuisesti toimitettavaksi tarkkuuslisävarusteiden valikoimaksi. Jokainen tuote suunnitellaan ja 3D-tulostetaan samalla käytännönläheisellä yksityiskohtien huomioimisella, jolla kaikki alkoi.

YURIK Accessories on itsenäinen räätälöityjen jälkimarkkinaosien valmistaja. Kaikki mainitut ajoneuvojen tuotemerkit, logot ja mallit ovat omistajiensa tavaramerkkejä, ja niitä käytetään ainoastaan ​​osoittamaan ajoneuvojen yhteensopivuutta.

Näytä kaikki tiedot