{"product_id":"backup-camera-hood-vw-audi-skoda-cupra","title":"Backup Camera Hood for VW, Audi, Škoda SEAT \u0026 CUPRA","description":"\u003ch2\u003eA Clearer View When Reversing at Night\u003c\/h2\u003e\n\u003cp\u003eStray light around the rear camera can create glare and light wash in the backup-camera image, particularly at night.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eYURIK Backup Camera Hood\u003c\/strong\u003e extends around the camera to help shield the lens from unwanted light, reducing glare and providing a cleaner view when reversing in low-light conditions.\u003c\/p\u003e\n\u003cp\u003eDesigned around the backup-camera system used across a wide range of Volkswagen Group vehicles, one compact accessory fits numerous Volkswagen, Audi, Škoda and CUPRA models.\u003c\/p\u003e\n\u003ch3\u003eWhy You'll Like It\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHelps reduce nighttime glare\u003c\/strong\u003e — shields the camera lens from stray light\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCleaner reversing-camera image\u003c\/strong\u003e — particularly useful at night and in low-light conditions\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional lens protection\u003c\/strong\u003e — helps reduce direct exposure to rain, dirt and road grime\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBroad vehicle compatibility\u003c\/strong\u003e — fits the compatible camera design used across many Volkswagen Group models\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEasy installation\u003c\/strong\u003e — attaches using 3M double-sided adhesive\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eNo drilling required\u003c\/strong\u003e — no permanent vehicle modification\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCompact design\u003c\/strong\u003e — designed to avoid obstructing the camera's intended view\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the EU\u003c\/strong\u003e — designed and 3D printed by YURIK Accessories\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Add a Camera Hood?\u003c\/h3\u003e\n\u003cp\u003eAt night, stray light reaching the backup-camera lens can create glare or a washed-out appearance in the camera image.\u003c\/p\u003e\n\u003cp\u003eThe YURIK camera hood extends around the lens to help block some of this unwanted light before it reaches the camera.\u003c\/p\u003e\n\u003cp\u003eThe result is less glare and a cleaner image in situations where stray light would otherwise affect the camera view.\u003c\/p\u003e\n\u003cp\u003eThe hood also provides some shelter from rain and road contamination, helping reduce how much reaches the camera lens.\u003c\/p\u003e\n\u003ch3\u003eVehicle Compatibility\u003c\/h3\u003e\n\u003cp\u003eThis camera hood fits the compatible factory backup-camera design used across a wide range of:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolkswagen\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAudi\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eŠkoda\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSEAT\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCUPRA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompatible models include vehicles such as the \u003cstrong\u003eVW ID.4, ID.5, ID. Buzz Tiguan, T-Roc; Audi Q4 e-tron; Škoda Enyaq and Elroq, Scala, Kamiq, Kodiaq\u003c\/strong\u003e, as well as numerous other Volkswagen Group models using the same compatible camera configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKnown exclusions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eVolkswagen ID.3\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVolkswagen Golf\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVolkswagen Polo\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eCupra Born\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause camera configurations can vary between models, model years and equipment versions, please check the compatibility information and product photos before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eNo drilling or permanent vehicle modification is required.\u003c\/li\u003e\n\u003cli\u003eThoroughly clean and dry the mounting area around the backup camera.\u003c\/li\u003e\n\u003cli\u003eTest-fit the hood and confirm its correct position before removing the adhesive backing.\u003c\/li\u003e\n\u003cli\u003eRemove the backing from the 3M double-sided adhesive.\u003c\/li\u003e\n\u003cli\u003eCarefully position the hood around the camera.\u003c\/li\u003e\n\u003cli\u003ePress firmly into place to establish a secure adhesive bond.\u003c\/li\u003e\n\u003cli\u003eCheck the backup-camera image and confirm that the hood does not obstruct the camera's intended field of view.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFor best adhesion, install on a clean, dry surface.\u003c\/p\u003e\n\u003ch3\u003eReal-World Testing\u003c\/h3\u003e\n\u003cp\u003eThe design has been tested in real-world driving conditions to evaluate its effect on nighttime camera glare and image visibility.\u003c\/p\u003e\n\u003cp\u003eA field-test video showing the camera hood in use is available on this product page.\u003c\/p\u003e\n\u003ch3\u003eMaterial \u0026amp; Manufacturing\u003c\/h3\u003e\n\u003cp\u003eThe camera hood is 3D printed for exterior automotive use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e 3M double-sided adhesive\u003cbr\u003e\u003cstrong\u003eManufacturing method:\u003c\/strong\u003e 3D printing\u003cbr\u003e\u003cstrong\u003eDesigned by:\u003c\/strong\u003e YURIK Accessories\u003cbr\u003e\u003cstrong\u003eManufactured in:\u003c\/strong\u003e European Union\u003c\/p\u003e\n\u003cp\u003eBecause this is a 3D-printed product, minor layer lines and other surface characteristics associated with the printing process may be visible. These are normal and do not affect the intended function of the product.\u003c\/p\u003e\n\u003ch3\u003eImportant Information\u003c\/h3\u003e\n\u003cp\u003eInstall the hood only around a compatible factory backup camera and confirm the correct fit before use.\u003c\/p\u003e\n\u003cp\u003eAfter installation, verify that the complete backup-camera image remains visible and that the hood does not obstruct the camera's intended field of view.\u003c\/p\u003e\n\u003cp\u003eDo not use the product if it is cracked, damaged, deformed or no longer securely attached.\u003c\/p\u003e\n\u003cp\u003eThis accessory may help reduce glare and contamination reaching the camera lens, but it does not eliminate the need to keep the camera lens clean. Always visually check your surroundings when reversing and use the vehicle's camera and parking-assistance systems as supplementary aids.\u003c\/p\u003e\n\u003cp\u003eYURIK Accessories is an independent aftermarket-accessory manufacturer and is not affiliated with or endorsed by Volkswagen AG, Audi AG, Škoda Auto SEAT or CUPRA. Vehicle manufacturer and model names are trademarks of their respective owners and are used solely to identify compatibility.\u003c\/p\u003e","brand":"YURIK Accessories","offers":[{"title":"Default Title","offer_id":53455808201036,"sku":"BCK-UP-CAM","price":13.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/3232\/0844\/files\/a-better-backup-camera-hood-for-vw-id4id5gtx-improves-picture-quality-at-night-493342.jpg?v=1758869384","url":"https:\/\/yurikaccessories.com\/nb\/products\/backup-camera-hood-vw-audi-skoda-cupra","provider":"YURIK Accessories","version":"1.0","type":"link"}