{"title":"ID.4 \/ ID.5 \/ ID.GTX","description":"\u003cp\u003e\u003cspan\u003eTransform your Volkswagen ID.4 or ID.5 with our premium range of custom-fit 3D-printed accessories. From clever storage solutions to protective snow covers and LED upgrades, every product is precision-engineered to match your VW's interior and exterior quality. No tools required—just drop-in installation that takes seconds. Whether you're organizing your glove box, protecting your charging port from winter weather, or adding illuminated style, our VW ID.4 collection delivers functionality, durability, and a perfect fit. Made from high-quality PETG materials, each accessory is built to last and designed to enhance your daily driving experience.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"ev-charging-port-snow-cover-for-volkswagen-id-4-by-yurik-accessories","title":"Charging Port Snow Cover for VW ID.4 \/ ID.5 \/ ID.4 GTX \/ ID.5 GTX 2021-2026","description":"\u003ch2\u003eKeep Snow and Ice Away From Your Charging Port\u003c\/h2\u003e\n\u003cp\u003eWinter charging can leave your charging port and connector exposed to snow, freezing rain and ice for hours at a time.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eYURIK Charging Port Snow Cover\u003c\/strong\u003e is designed specifically for the Volkswagen ID.4 and ID.5 family. It shields the charging-port area and extends over the charging handle, helping reduce snow and ice buildup while your car is plugged in.\u003c\/p\u003e\n\u003ch3\u003eWhy You'll Like It\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-specific fit\u003c\/strong\u003e — designed for the VW ID.4 and ID.5 family, not a universal cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended protection\u003c\/strong\u003e — shields both the charging-port area and charging handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelps reduce snow and ice buildup\u003c\/strong\u003e during outdoor winter charging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure sliding lock\u003c\/strong\u003e — helps keep the cover firmly in position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisible charging status\u003c\/strong\u003e — a transparent viewing area lets you check the charging indicator without removing the cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCS1 \u0026amp; CCS2 versions\u003c\/strong\u003e — available for North American and European charging-port configurations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePETG construction\u003c\/strong\u003e — the entire cover is 3D printed from PETG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the EU\u003c\/strong\u003e — designed and manufactured by YURIK Accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDesigned for Winter Charging\u003c\/h3\u003e\n\u003cp\u003eInstall the cover over the charging-port area, secure it in place, and then connect your charging cable.\u003c\/p\u003e\n\u003cp\u003eThe extended hood helps shield the charging connection and charging handle from falling snow and freezing precipitation while the vehicle is plugged in.\u003c\/p\u003e\n\u003cp\u003eA transparent viewing area keeps the vehicle's charging-status indicator visible, so you can check the charging status without removing the cover.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eDesigned for \u003cstrong\u003eall model years\u003c\/strong\u003e of:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolkswagen ID.4\u003c\/li\u003e\n\u003cli\u003eVolkswagen ID.4 GTX\u003c\/li\u003e\n\u003cli\u003eVolkswagen ID.5\u003c\/li\u003e\n\u003cli\u003eVolkswagen ID.5 GTX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoose the Correct Version\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eUSA \/ Canada — CCS1\u003c\/strong\u003e\u003cbr\u003eChoose this version for compatible North American vehicles equipped with a CCS1 charging port.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEU \/ UK — CCS2\u003c\/strong\u003e\u003cbr\u003eChoose this version for compatible European and UK vehicles equipped with a CCS2 charging port.\u003c\/p\u003e\n\u003cp\u003ePlease select the correct charging-port version for your vehicle when ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eNo tools, drilling or permanent vehicle modifications are required.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eOpen the vehicle's charging-port door.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePosition the snow cover over the charging-port area.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSecure the cover using the sliding lock.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInsert the charging connector through the cover and fully into the vehicle's charging port.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConfirm that the charging connector is properly inserted and charging has started.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCheck the charging status through the transparent viewing area.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eWhen charging is finished, disconnect the charging cable and \u003cstrong\u003eremove the snow cover before driving\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eMaterial \u0026amp; Manufacturing\u003c\/h3\u003e\n\u003cp\u003eThe entire cover is \u003cstrong\u003e3D printed from PETG\u003c\/strong\u003e, including the integrated sliding locking mechanism.\u003c\/p\u003e\n\u003cp\u003ePETG is well suited to functional exterior applications because of its durability, impact resistance and resistance to moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG\u003cbr\u003e\u003cstrong\u003eManufacturing method:\u003c\/strong\u003e 3D printing\u003cbr\u003e\u003cstrong\u003eDesigned by:\u003c\/strong\u003e YURIK Accessories\u003cbr\u003e\u003cstrong\u003eManufactured in:\u003c\/strong\u003e European Union\u003c\/p\u003e\n\u003cp\u003eBecause this is a 3D-printed product, minor layer lines and other surface characteristics associated with the printing process may be visible. These are normal and do not affect the intended function of the product.\u003c\/p\u003e\n\u003ch3\u003eImportant Information\u003c\/h3\u003e\n\u003cp\u003eThis accessory is designed to provide additional protection from snow, ice and freezing precipitation while your vehicle is \u003cstrong\u003eparked and charging\u003c\/strong\u003e. It does not make the vehicle's charging system waterproof or guarantee that ice cannot form under all weather conditions.\u003c\/p\u003e\n\u003cp\u003eMake sure the charging connector is fully inserted and properly locked before leaving the vehicle unattended.\u003c\/p\u003e\n\u003cp\u003eDo not use the cover if it is cracked, damaged, deformed or cannot be securely positioned. Heavy snow or ice accumulation may require additional clearing around the charging area.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlways remove the snow cover before driving.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAlways follow the instructions and safety information provided by your vehicle and charging-equipment manufacturers.\u003c\/p\u003e\n\u003cp\u003eYURIK Accessories is an independent aftermarket-accessory manufacturer and is not affiliated with or endorsed by Volkswagen AG. Volkswagen, ID.4, ID.5 and GTX are trademarks of their respective owners and are used solely to identify vehicle compatibility.\u003c\/p\u003e\n\u003c!----\u003e","brand":"YURIK Accessories","offers":[{"title":"USA\/Canada CCS1","offer_id":53455802138956,"sku":"VWID4USA-1","price":27.22,"currency_code":"EUR","in_stock":true},{"title":"EU\/UK CCS2","offer_id":53455802171724,"sku":"VWID4USA-2","price":27.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/3232\/0844\/files\/id.4_protective_cover_collage.jpg?v=1768426837"},{"product_id":"protective-grill-for-the-rear-under-seat-heating-vent-for-vw-id-4","title":"Protective grill for the rear under seat heating vent for VW ID.3, ID.4, 4\/Skoda Enyak\/Elroq\/Audi Q4 etron","description":"\u003cp\u003eSet of 2 protective covers for the rear under-seat heating vent for VW ID.4 is designed to protect the heating vent from getting blocked by small debris like crackers, chips, leaves, coins etc, and save you from the nightmare of getting them out. \u003cbr data-mce-fragment=\"1\"\u003eDesigned to fit around the vent snugly, it is minimalist and functional.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePRODUCT UPDATED ON 01\/03\/26. New mesh openinings stop even smaller debris.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e3D printed from heat-resistant non-toxic PETG plastic.\u003c\/p\u003e","brand":"YURIK Accessories","offers":[{"title":"Default Title","offer_id":53455807119692,"sku":"MEB-VENT-CVR","price":8.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/3232\/0844\/files\/BE2FD2E3-6308-4AC0-B2F6-341195B0AE67.jpg?v=1758869364"},{"product_id":"washer-fluid-reservoir-cap-with-built-in-funnel","title":"Washer fluid reservoir cap with built-in funnel","description":"\u003cp\u003eThis funnel will help you to avoid spilling washer fluid over the engine bay in VW (Volkswagen), Audi, Skoda, SEAT, Cupra electric, hybrid, gas, and diesel vehicles. Easy, no tool installation.\u003c\/p\u003e","brand":"YURIK Accessories","offers":[{"title":"Default Title","offer_id":53455807185228,"sku":"FNL-VAG","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/3232\/0844\/files\/washer-fluid-reservoir-cap-with-built-in-funnel-321209.jpg?v=1758869363"},{"product_id":"vw-id4-glove-box-organizer","title":"Glove Box Organizer for VW ID.4 (2021–2026)","description":"\u003ch2\u003eTurn Your ID.4 Glove Box Into Organized Storage\u003c\/h2\u003e\n\u003cp\u003eMake better use of your VW ID.4 glove box with the \u003cstrong\u003eYURIK Glove Box Organizer\u003c\/strong\u003e, designed specifically for the shape and layout of the ID.4.\u003c\/p\u003e\n\u003cp\u003eInstead of storing everything together in one large compartment, the organizer creates separate sections for your owner's manual, sunglasses, charging cables and other everyday essentials.\u003c\/p\u003e\n\u003cp\u003eIt clips securely into place without drilling, adhesive or permanent modification to your vehicle.\u003c\/p\u003e\n\u003ch3\u003eWhy You'll Like It\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned specifically for the VW ID.4\u003c\/strong\u003e — custom fit for 2021–2026 models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple storage compartments\u003c\/strong\u003e — separate manuals, sunglasses, cables and other small items\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMakes items easier to find\u003c\/strong\u003e — less rummaging through a single large compartment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure snap-fit installation\u003c\/strong\u003e — clips into the glove box without permanent modification\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNo tools or adhesive required\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLightweight 3D-printed construction\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean, integrated appearance\u003c\/strong\u003e — designed around the ID.4 interior\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the EU\u003c\/strong\u003e — designed and 3D printed by YURIK Accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eA More Useful Glove Box\u003c\/h3\u003e\n\u003cp\u003eThe standard ID.4 glove box provides useful storage space, but smaller items can easily end up mixed together.\u003c\/p\u003e\n\u003cp\u003eThe YURIK organizer divides that space into dedicated sections, making it easier to keep frequently used items separated and within reach.\u003c\/p\u003e\n\u003cp\u003eUse it to organize items such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOwner's manual and vehicle documents\u003c\/li\u003e\n\u003cli\u003eSunglasses\u003c\/li\u003e\n\u003cli\u003eCharging cables\u003c\/li\u003e\n\u003cli\u003ePens\u003c\/li\u003e\n\u003cli\u003eCards\u003c\/li\u003e\n\u003cli\u003eOther small everyday essentials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eDesigned for:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVolkswagen ID.4 — 2021–2026\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLeft-hand-drive vehicles only.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis organizer \u003cstrong\u003edoes not fit right-hand-drive ID.4 models\u003c\/strong\u003e because of differences in the glove-box configuration.\u003c\/p\u003e\n\u003cp\u003ePlease check your vehicle configuration before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eNo tools, drilling or adhesive are required.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eAlign two parts and snap them together\u003c\/li\u003e\n\u003cli\u003eOpen the glove box and remove loose items.\u003c\/li\u003e\n\u003cli\u003ePosition the organizer inside the glove box.\u003c\/li\u003e\n\u003cli\u003eAlign it with the intended mounting points.\u003c\/li\u003e\n\u003cli\u003ePress the organizer into position until it is securely clipped in place.\u003c\/li\u003e\n\u003cli\u003eCheck that the organizer is properly seated before loading it with your belongings.\u003c\/li\u003e\n\u003cli\u003eInstallation is completely reversible and requires no permanent modification to the vehicle.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eMaterial \u0026amp; Manufacturing\u003c\/h3\u003e\n\u003cp\u003eThe organizer is 3D printed for everyday interior use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing method:\u003c\/strong\u003e 3D printing\u003cbr\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Tool-free snap fit\u003cbr\u003e\u003cstrong\u003eDesigned by:\u003c\/strong\u003e YURIK Accessories\u003cbr\u003e\u003cstrong\u003eManufactured in:\u003c\/strong\u003e European Union\u003c\/p\u003e\n\u003cp\u003eBecause this is a 3D-printed product, minor layer lines and other surface characteristics associated with the printing process may be visible. These are normal and do not affect the intended function of the product.\u003c\/p\u003e\n\u003ch3\u003eImportant Information\u003c\/h3\u003e\n\u003cp\u003eMake sure the organizer is properly installed and securely seated before use.\u003c\/p\u003e\n\u003cp\u003eDo not overload individual compartments or place objects inside that prevent the glove box from opening or closing normally.\u003c\/p\u003e\n\u003cp\u003eDo not use the organizer if it is cracked, damaged, deformed or can no longer be securely installed.\u003c\/p\u003e\n\u003cp\u003eYURIK Accessories is an independent aftermarket-accessory manufacturer and is not affiliated with or endorsed by Volkswagen AG. Volkswagen and ID.4 are trademarks of their respective owners and are used solely to identify vehicle compatibility.\u003c\/p\u003e","brand":"YURIK Accessories","offers":[{"title":"Default Title","offer_id":53455807217996,"sku":"ID4-GLVBX","price":28.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/3232\/0844\/files\/IMG-6754.jpg?v=1758869366"},{"product_id":"led-badge-kit-for-vw-id-4-compatible-with-cars-equipped-with-led-bars","title":"LED badge kit for VW ID.4 with front LED bars","description":"\u003cp\u003eFront LED badge plug-and-play kit for Volkswagen ID.4. This kit can be installed on ID.4s \u003cstrong\u003ethat already have\u003c\/strong\u003e LED front bars only.\u003c\/p\u003e\n\u003cp\u003eThe full kit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003efront LED badge - original VW part\u003c\/li\u003e\n\u003cli\u003etwo custom-made Y-split wire harnesses\u003c\/li\u003e\n\u003cli\u003e3 bolts to secure the LED badge to the front grill\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso available for order:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eT-split wireharness, 2 pcs\u003c\/li\u003e\n\u003cli\u003eonly an LED badge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #f40e0e;\"\u003e\u003cstrong\u003eDOES NOT FIT IF YOU HAVE A CAMERA IN THE BADGE.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eHow\u003cspan style=\"font-size: 0.875rem;\"\u003e to install:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener noreferrer\" title=\"Installation video\" href=\"https:\/\/youtu.be\/cF2WEm07ZHU\" target=\"_blank\"\u003ehttps:\/\/youtu.be\/cF2WEm07ZHU\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"YURIK Accessories","offers":[{"title":"LED badge + wires kit + 3 bolts","offer_id":53455807316300,"sku":"LEDBDG-WRS","price":209.0,"currency_code":"EUR","in_stock":false},{"title":"LED badge only","offer_id":53455807283532,"sku":"LEDBDG-ONL","price":110.0,"currency_code":"EUR","in_stock":false},{"title":"2 X Y-split cables for LED badge","offer_id":56202538320204,"sku":"LED-Y-SPLT","price":63.66,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/3232\/0844\/files\/led-badge-kit-for-vw-id4-compatible-with-cars-equipped-with-front-led-bars-4957469.png?v=1763231635"},{"product_id":"32oz-nalgene-bottle-adapter-for-volkswagen-id-4","title":"YETI \/ Nalgene bottle adapter for Volkswagen ID.4\/ID.5 and other models","description":"\u003cp\u003e\u003cspan\u003eYETI \/ Nalgene bottle adapter allows you to take your favorite hydration bottle with you and have it conveniently within your reach. The adapter inserts into the front or rear cup holder of the central console of your 2021, 2022, 2023, 2024 or 2025 Volkswagen ID.4 and has a snug fit for your bottle. Please select a YETI \/ Nalgene bottle. If you can't find the size (bottom diameter) in our list, send us a request, including the link to the bottle' specs.\u003c\/span\u003e\u003c\/p\u003e","brand":"YURIK Accessories","offers":[{"title":"Nalgene 32oz 3.5-in","offer_id":53455807873356,"sku":"NLG-35","price":17.36,"currency_code":"EUR","in_stock":true},{"title":"YETI 36oz 3.75inch","offer_id":53455807906124,"sku":"NLG-375","price":17.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/3232\/0844\/files\/image_7810ffe5-fa26-4b26-b090-aa90b9f7b4f6.jpg?v=1758869380"},{"product_id":"vw-id4-rear-cupholder-2023-2026","title":"Removable Rear Cupholder for VW ID.4 (2023–2026 US\/Canada)","description":"\u003ch2\u003eGive Your Rear Passengers a Proper Place for Their Drinks\u003c\/h2\u003e\n\u003cp\u003eAdd convenient rear cupholders to your \u003cstrong\u003e2023–2026 US\/Canadian Volkswagen ID.4\u003c\/strong\u003e without drilling, tools or permanent modification.\u003c\/p\u003e\n\u003cp\u003eThe YURIK Removable Rear Cupholder fits into the rear center-console area, giving passengers a convenient place for drinks while keeping the vehicle's rear USB-C ports accessible.\u003c\/p\u003e\n\u003cp\u003eWhen you don't need the cupholder, simply remove it.\u003c\/p\u003e\n\u003ch3\u003eWhy You'll Like It\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eAdds rear cupholders\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e — convenient drink storage for back-seat passengers\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eDesigned specifically for the VW ID.4\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e — made around the 2023–2026 North American rear-console configuration\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eSecure clip-on fit\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e — inserts into the existing cubby and clips onto its lower lip\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eCompletely removable\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e — take it out whenever you want the original storage space back\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eNo tools or adhesive\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e — no drilling, screws or permanent modification\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eKeeps USB-C ports accessible\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e — rear passengers can continue using the charging ports\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003ePETG construction\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e — 3D printed for everyday interior use\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eClean, integrated appearance\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e — designed around the ID.4 interior\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the EU\u003c\/strong\u003e — designed and 3D printed by YURIK Accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eDesigned Around the ID.4 Rear Console\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eRather than permanently attaching a cupholder to the interior, this design makes use of the \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eexisting storage cubby below the rear air vents\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe cupholder inserts into the cubby and clips onto its lower lip, helping to hold the unit securely in position without screws, adhesive or modifications to the vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe design also preserves access to the rear USB-C charging ports.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBecause the installation is completely removable, you can take the cupholder out whenever you want to use the original cubby space again.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eDesigned for:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVolkswagen ID.4 — US\/Canadian models, 2023–2026\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This cupholder does \u003cstrong\u003enot\u003c\/strong\u003e fit versions equipped with heated rear seats (Plus).\u003c\/p\u003e\n\u003cp\u003ePlease check your vehicle configuration before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eNo tools, drilling or permanent modification are required.\u003c\/li\u003e\n\u003cli\u003eRemove the rubber mat from the cubby\u003c\/li\u003e\n\u003cli\u003ePosition the cupholder at the rear center-console mounting area.\u003c\/li\u003e\n\u003cli\u003eInsert it into the intended position until it clicks\u003c\/li\u003e\n\u003cli\u003eMake sure the cupholder is fully seated and secure before use.\u003c\/li\u003e\n\u003cli\u003eRemove it whenever the additional space is preferred.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe rear USB-C ports remain accessible with the cupholder installed.\u003c\/p\u003e\n\u003ch3\u003eMaterial \u0026amp; Manufacturing\u003c\/h3\u003e\n\u003cp\u003eThe cupholder is \u003cstrong\u003e3D printed from PETG\u003c\/strong\u003e for everyday use inside the vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG\u003cbr\u003e\u003cstrong\u003eManufacturing method:\u003c\/strong\u003e 3D printing\u003cbr\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Removable, tool-free\u003cbr\u003e\u003cstrong\u003eDesigned by:\u003c\/strong\u003e YURIK Accessories\u003cbr\u003e\u003cstrong\u003eManufactured in:\u003c\/strong\u003e European Union\u003c\/p\u003e\n\u003cp\u003eBecause this is a 3D-printed product, minor layer lines and other surface characteristics associated with the printing process may be visible. These are normal and do not affect the intended function of the product.\u003c\/p\u003e\n\u003ch3\u003eImportant Information\u003c\/h3\u003e\n\u003cp\u003eMake sure the cupholder is correctly installed and secure before driving.\u003c\/p\u003e\n\u003cp\u003eUse containers that fit securely in the cupholder. An improperly sized or unsecured container may tip or spill during acceleration, braking or cornering.\u003c\/p\u003e\n\u003cp\u003eDo not overload the cupholder or use it if it is cracked, damaged, deformed or can no longer be securely positioned.\u003c\/p\u003e\n\u003cp\u003eRemove any spilled liquid promptly and follow the vehicle manufacturer's recommendations for cleaning the surrounding interior and electronic\/USB-C areas.\u003c\/p\u003e\n\u003cp\u003eYURIK Accessories is an independent aftermarket-accessory manufacturer and is not affiliated with or endorsed by Volkswagen AG. Volkswagen and ID.4 are trademarks of their respective owners and are used solely to identify vehicle compatibility.\u003c\/p\u003e","brand":"YURIK Accessories","offers":[{"title":"Default Title","offer_id":53455807938892,"sku":"10001","price":38.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/3232\/0844\/files\/removable-rear-cupholder-for-us-build-2023-vw-id4-707342.jpg?v=1790235812"},{"product_id":"volume-and-temperature-control-glow-in-dark-stickers-for-volkswagen-id-4-and-golf-mark-viii","title":"Volume and temperature control glow-in-dark stickers for VAG(VW, Cupra, Skoda) cars with touch screen","description":"\u003cp\u003eWith these glow-in-the-dark stickers, you can quickly and easily adjust the volume and temperature in your VW, SKODA, or CUPRA equipped with non-backlit sliders for temperature and volume, without fumbling for the right controls in the dark\u003c\/p\u003e\n\u003cp\u003eThese stickers are perfect for drivers who prefer to navigate their car's features without having to turn on the interior lights at night.\u003c\/p\u003e\n\u003cp\u003eMade with high-quality, long-lasting glow-in-the-dark vinyl, these stickers are easy to apply and won't damage your car's central screen surface.\u003c\/p\u003e\n\u003cp\u003eThe glow-in-the-dark feature means these stickers will absorb light during the day and emit a soft glow at night for hours, making them easy to find and use even in low-light conditions.\u003c\/p\u003e\n\u003cp\u003e.\u003c\/p\u003e\n\u003cp\u003ePackage includes:\u003cbr\u003e- 3 glow-in-the-dark stickers\u003cbr\u003e- transfer film\u003cbr\u003e- installation manual with QR code to the how-to install video.\u003c\/p\u003e\n\u003cp\u003ePlease note that the camera increases sensitivity for night shooting and the actual glow will look less bright to the human eye as it is in the pictures of this listing.\u003c\/p\u003e","brand":"YURIK Accessories","offers":[{"title":"Default Title","offer_id":53455808004428,"sku":"GLW01","price":6.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/3232\/0844\/files\/image_ac1ccd04-ce09-45b3-900e-07c81fe646cc.jpg?v=1766081822"},{"product_id":"backup-camera-hood-vw-audi-skoda-cupra","title":"Backup Camera Hood for VW, Audi, Škoda SEAT \u0026 CUPRA","description":"\u003ch2\u003eA Clearer View When Reversing at Night\u003c\/h2\u003e\n\u003cp\u003eStray light around the rear camera can create glare and light wash in the backup-camera image, particularly at night.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eYURIK Backup Camera Hood\u003c\/strong\u003e extends around the camera to help shield the lens from unwanted light, reducing glare and providing a cleaner view when reversing in low-light conditions.\u003c\/p\u003e\n\u003cp\u003eDesigned around the backup-camera system used across a wide range of Volkswagen Group vehicles, one compact accessory fits numerous Volkswagen, Audi, Škoda and CUPRA models.\u003c\/p\u003e\n\u003ch3\u003eWhy You'll Like It\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHelps reduce nighttime glare\u003c\/strong\u003e — shields the camera lens from stray light\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCleaner reversing-camera image\u003c\/strong\u003e — particularly useful at night and in low-light conditions\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional lens protection\u003c\/strong\u003e — helps reduce direct exposure to rain, dirt and road grime\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBroad vehicle compatibility\u003c\/strong\u003e — fits the compatible camera design used across many Volkswagen Group models\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEasy installation\u003c\/strong\u003e — attaches using 3M double-sided adhesive\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eNo drilling required\u003c\/strong\u003e — no permanent vehicle modification\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCompact design\u003c\/strong\u003e — designed to avoid obstructing the camera's intended view\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the EU\u003c\/strong\u003e — designed and 3D printed by YURIK Accessories\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Add a Camera Hood?\u003c\/h3\u003e\n\u003cp\u003eAt night, stray light reaching the backup-camera lens can create glare or a washed-out appearance in the camera image.\u003c\/p\u003e\n\u003cp\u003eThe YURIK camera hood extends around the lens to help block some of this unwanted light before it reaches the camera.\u003c\/p\u003e\n\u003cp\u003eThe result is less glare and a cleaner image in situations where stray light would otherwise affect the camera view.\u003c\/p\u003e\n\u003cp\u003eThe hood also provides some shelter from rain and road contamination, helping reduce how much reaches the camera lens.\u003c\/p\u003e\n\u003ch3\u003eVehicle Compatibility\u003c\/h3\u003e\n\u003cp\u003eThis camera hood fits the compatible factory backup-camera design used across a wide range of:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolkswagen\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAudi\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eŠkoda\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSEAT\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCUPRA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompatible models include vehicles such as the \u003cstrong\u003eVW ID.4, ID.5, ID. Buzz Tiguan, T-Roc; Audi Q4 e-tron; Škoda Enyaq and Elroq, Scala, Kamiq, Kodiaq\u003c\/strong\u003e, as well as numerous other Volkswagen Group models using the same compatible camera configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKnown exclusions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eVolkswagen ID.3\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVolkswagen Golf\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVolkswagen Polo\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eCupra Born\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause camera configurations can vary between models, model years and equipment versions, please check the compatibility information and product photos before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eNo drilling or permanent vehicle modification is required.\u003c\/li\u003e\n\u003cli\u003eThoroughly clean and dry the mounting area around the backup camera.\u003c\/li\u003e\n\u003cli\u003eTest-fit the hood and confirm its correct position before removing the adhesive backing.\u003c\/li\u003e\n\u003cli\u003eRemove the backing from the 3M double-sided adhesive.\u003c\/li\u003e\n\u003cli\u003eCarefully position the hood around the camera.\u003c\/li\u003e\n\u003cli\u003ePress firmly into place to establish a secure adhesive bond.\u003c\/li\u003e\n\u003cli\u003eCheck the backup-camera image and confirm that the hood does not obstruct the camera's intended field of view.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFor best adhesion, install on a clean, dry surface.\u003c\/p\u003e\n\u003ch3\u003eReal-World Testing\u003c\/h3\u003e\n\u003cp\u003eThe design has been tested in real-world driving conditions to evaluate its effect on nighttime camera glare and image visibility.\u003c\/p\u003e\n\u003cp\u003eA field-test video showing the camera hood in use is available on this product page.\u003c\/p\u003e\n\u003ch3\u003eMaterial \u0026amp; Manufacturing\u003c\/h3\u003e\n\u003cp\u003eThe camera hood is 3D printed for exterior automotive use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e 3M double-sided adhesive\u003cbr\u003e\u003cstrong\u003eManufacturing method:\u003c\/strong\u003e 3D printing\u003cbr\u003e\u003cstrong\u003eDesigned by:\u003c\/strong\u003e YURIK Accessories\u003cbr\u003e\u003cstrong\u003eManufactured in:\u003c\/strong\u003e European Union\u003c\/p\u003e\n\u003cp\u003eBecause this is a 3D-printed product, minor layer lines and other surface characteristics associated with the printing process may be visible. These are normal and do not affect the intended function of the product.\u003c\/p\u003e\n\u003ch3\u003eImportant Information\u003c\/h3\u003e\n\u003cp\u003eInstall the hood only around a compatible factory backup camera and confirm the correct fit before use.\u003c\/p\u003e\n\u003cp\u003eAfter installation, verify that the complete backup-camera image remains visible and that the hood does not obstruct the camera's intended field of view.\u003c\/p\u003e\n\u003cp\u003eDo not use the product if it is cracked, damaged, deformed or no longer securely attached.\u003c\/p\u003e\n\u003cp\u003eThis accessory may help reduce glare and contamination reaching the camera lens, but it does not eliminate the need to keep the camera lens clean. Always visually check your surroundings when reversing and use the vehicle's camera and parking-assistance systems as supplementary aids.\u003c\/p\u003e\n\u003cp\u003eYURIK Accessories is an independent aftermarket-accessory manufacturer and is not affiliated with or endorsed by Volkswagen AG, Audi AG, Škoda Auto SEAT or CUPRA. Vehicle manufacturer and model names are trademarks of their respective owners and are used solely to identify compatibility.\u003c\/p\u003e","brand":"YURIK Accessories","offers":[{"title":"Default Title","offer_id":53455808201036,"sku":"BCK-UP-CAM","price":13.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/3232\/0844\/files\/a-better-backup-camera-hood-for-vw-id4id5gtx-improves-picture-quality-at-night-493342.jpg?v=1758869384"},{"product_id":"central-console-opening-drop-in-tray-for-vw-id-4-v2","title":"Central Console Opening Drop in Tray for Volkswagen ID.4","description":"\u003cp\u003eA central console opening drop-in tray for VW ID.4 adds even more useful space.\u003cbr\u003eIt features an opening for the charging and is 7 inches in length. \u003cbr\u003eIt sits on top of the central console tray and can accommodate your wallet, cellphone, or anything else keeping it nearby and readily available for you to pick up without taking your eyes off the road and digging inside the central console. \u003c\/p\u003e\n\u003cp\u003e3D-printed from heat-resistant PETG non-toxic plastic.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eATTENTION: FITS 2021-22 US\/CAN and 2021, 2022, 2023, 2024 and 2025 European models. DOES NOT FIT US\/CAN 2023-24\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"YURIK Accessories","offers":[{"title":"2021-2022 US\/Canada","offer_id":57623858970956,"sku":"DRP-IN-ID4","price":16.19,"currency_code":"EUR","in_stock":true},{"title":"2021-2025 EU\/UK\/AUS\/NZ\/SK","offer_id":57623859003724,"sku":"DRP-IN-ID5","price":16.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/3232\/0844\/files\/central-console-opening-drop-in-tray-for-vw-id4-248143.jpg?v=1758869386"},{"product_id":"vw-id-4-no-drilling-rear-license-plate-mount","title":"No-Drill License Plate Mount for VW ID.4 (2021–2026)","description":"\u003ch2\u003eMount Your License Plate Without Drilling Your ID.4\u003c\/h2\u003e\n\u003cp\u003eDesigned specifically for the \u003cstrong\u003eVolkswagen ID.4\u003c\/strong\u003e, this no-drill license plate mount lets you securely install a front or rear license plate without drilling permanent holes in your vehicle.\u003c\/p\u003e\n\u003cp\u003eChoose the \u003cstrong\u003eFront Kit\u003c\/strong\u003e, \u003cstrong\u003eRear Kit\u003c\/strong\u003e, or \u003cstrong\u003eFront + Rear Kit\u003c\/strong\u003e to get exactly what you need.\u003c\/p\u003e\n\u003ch3\u003eWhy You'll Like It\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eNo drilling required\u003c\/strong\u003e — install your license plate without drilling holes in the bumper\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned specifically for the VW ID.4\u003c\/strong\u003e — not a universal-fit bracket\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eFront and rear options available\u003c\/strong\u003e — choose one mount or get both\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eClean, discreet installation\u003c\/strong\u003e — the bracket sits largely hidden behind the license plate\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDurable PETG construction\u003c\/strong\u003e — designed for exterior automotive use\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the EU\u003c\/strong\u003e — designed and 3D printed by YURIK Accessories\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFront License Plate Mount\u003c\/h3\u003e\n\u003cp\u003eThe front bracket attaches to the ID.4 grille without requiring permanent modification to the bumper.\u003c\/p\u003e\n\u003cp\u003eTwo mounting positions are available, allowing you to position the license plate higher or lower depending on your preference. See the product photos for examples of both positions.\u003c\/p\u003e\n\u003cp\u003eThe mounting system is designed specifically around the shape and dimensions of the Volkswagen ID.4 rather than using a generic universal bracket.\u003c\/p\u003e\n\u003ch3\u003eRear License Plate Mount\u003c\/h3\u003e\n\u003cp\u003eThe rear bracket provides a no-drill alternative for mounting the rear license plate.\u003c\/p\u003e\n\u003cp\u003eThe current design features reinforced mounting arms and a tubular joint for additional rigidity while keeping the bracket discreetly positioned behind the license plate.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eDesigned for:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVolkswagen ID.4 — US and Canadian models, model years 2021–2026\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease confirm your vehicle model and model year before ordering.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eContents depend on the option selected:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFront Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFront license plate mounting bracket\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRequired mounting hardware\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInstallation instructions\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRear Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eRear license plate mounting bracket\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRequired mounting hardware\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInstallation instructions\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFront + Rear Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFront license plate mounting bracket\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRear license plate mounting bracket\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRequired mounting hardware\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInstallation instructions\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstallation requires \u003cstrong\u003eno drilling\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eFollow the installation instructions and video guide for your selected bracket. After installation, make sure the bracket, license plate, and mounting hardware are securely attached before driving.\u003c\/p\u003e\n\u003cp\u003eWe recommend periodically checking the bracket and hardware as part of your normal vehicle maintenance.\u003c\/p\u003e\n\u003ch3\u003eDesigned From Real-World Experience\u003c\/h3\u003e\n\u003cp\u003eThis isn't a universal bracket adapted to fit the ID.4. YURIK developed this mount specifically for the Volkswagen ID.4 and has used the design in real-world driving for nearly two years, including regular US highway use.\u003c\/p\u003e\n\u003cp\u003eMore than \u003cstrong\u003e3,000 customers across the US and Canada\u003c\/strong\u003e have used YURIK ID.4 license plate mounts in a wide range of climates—from cold northern winters to hot southern conditions.\u003c\/p\u003e\n\u003cp\u003eThe bracket is 3D printed from \u003cstrong\u003ePETG\u003c\/strong\u003e and sits largely behind the installed license plate, helping shield it from direct UV exposure.\u003c\/p\u003e\n\u003cp\u003eBased on our customer experience to date, we have received \u003cstrong\u003eno reports of vehicle overheating attributed to the mount\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eMaterial \u0026amp; Production\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG\u003cbr\u003e\u003cstrong\u003eManufacturing method:\u003c\/strong\u003e 3D printed\u003cbr\u003e\u003cstrong\u003eDesigned for:\u003c\/strong\u003e Volkswagen ID.4\u003cbr\u003e\u003cstrong\u003eMade by:\u003c\/strong\u003e YURIK Accessories\u003cbr\u003e\u003cstrong\u003eManufactured in:\u003c\/strong\u003e European Union\u003c\/p\u003e\n\u003cp\u003eBecause this is a 3D-printed product, minor surface characteristics associated with the printing process may be visible. These are normal for the manufacturing process and do not affect normal use.\u003c\/p\u003e\n\u003ch3\u003eImportant Information\u003c\/h3\u003e\n\u003cp\u003eCheck the bracket and mounting hardware periodically and before long journeys. Do not continue using the product if the bracket is cracked, damaged, deformed, or can no longer be securely attached.\u003c\/p\u003e\n\u003cp\u003eLicense plate mounting and positioning requirements vary by jurisdiction. The vehicle owner is responsible for ensuring that the installation and position of the license plate comply with applicable local requirements.\u003c\/p\u003e\n\u003cp\u003eYURIK Accessories is an independent aftermarket-accessory manufacturer and is not affiliated with or endorsed by Volkswagen AG. Volkswagen and ID.4 are trademarks of their respective owners and are used solely to identify vehicle compatibility.\u003c\/p\u003e","brand":"YURIK Accessories","offers":[{"title":"FRONT kit","offer_id":53455808299340,"sku":"PLT-KIT-FR-ID4","price":49.12,"currency_code":"EUR","in_stock":true},{"title":"REAR kit","offer_id":53455808332108,"sku":"PLT-KIT-R-ID4","price":26.63,"currency_code":"EUR","in_stock":true},{"title":"FRONT+REAR kit","offer_id":53455808364876,"sku":"PLT-KIT-FR-R","price":69.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/3232\/0844\/files\/no-drilling-license-plate-mounting-kits-for-volkswagen-id4-fits-2024-2023-2022-2021-model-years-704971.jpg?v=1758869387"},{"product_id":"storage-tray-for-vw-id-4-for-under-the-central-console-space","title":"Storage tray for VW ID.4 for under the central console space.","description":"\u003cp\u003eThe cabin floor storage tray for the Volkswagen ID.4 is designed to provide extra storage space for your vehicle. It is designed specifically to fit into the under-central console space of the ID.4, providing a perfect fit and easy installation.\u003cbr\u003eThe tray is 3D-printed from high-quality PETG plastic and is durable enough to withstand daily use. It is easy to clean and maintain, making it a practical and functional accessory for your vehicle. The tray has velcro on the bottom to attach to the floor, preventing it from sliding around while driving.\u003cbr\u003eThe cabin floor storage tray is perfect for storing small items such as sunglasses, mobile phones, wallets, keys, and other personal belongings. It is an ideal solution for keeping your vehicle organised and clutter-free, ensuring you always have your essential items within easy reach.\u003cbr\u003eIn summary, the cabin floor storage tray for the Volkswagen ID.4 is a practical and convenient accessory that provides extra storage space for your vehicle. It is easy to install, durable, and easy to clean, making it a perfect addition to your Volkswagen ID.4.\u003cbr\u003e\u003cbr\u003eCompatible with 2025, 2024, 2023, 2022, and 2021 US\/CAN\/EU\/UK\/AUS\/NZ\/JP\/SK models. Please select your car model year.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe tray fits in ID.4 RWD\/AWD\/GTX, ID.5 RWD\/AWD\/GTX\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"YURIK Accessories","offers":[{"title":"2023\/2025 US\/CAN model \/ with divider","offer_id":53455808463180,"sku":"23-ID4-BIN-DIV","price":24.24,"currency_code":"EUR","in_stock":true},{"title":"2023\/2025 US\/CAN model \/ w\/o divider","offer_id":57641793847628,"sku":"23-ID4-BIN-NODIV","price":22.04,"currency_code":"EUR","in_stock":true},{"title":"2021-2025 EU\/UK\/AUS\/NZ\/etc \/ with divider","offer_id":53455808725324,"sku":"21-ID4-BIN-DIV","price":24.24,"currency_code":"EUR","in_stock":true},{"title":"2021-2025 EU\/UK\/AUS\/NZ\/etc \/ w\/o divider","offer_id":57641793913164,"sku":"21-ID4-BIN-NODIV","price":22.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/3232\/0844\/files\/storage-tray-for-vw-id4-for-under-the-central-console-space-308641.jpg?v=1758869391"},{"product_id":"vw-id4-id5-sunglasses-tray","title":"Sunglasses \u0026 Small-Item Tray for VW ID.4 \/ ID.5","description":"\u003ch2\u003eTurn Unused Space Into Useful Storage\u003c\/h2\u003e\n\u003cp\u003eGive your sunglasses and everyday essentials a convenient home with the \u003cstrong\u003eYURIK Sunglasses \u0026amp; Small-Item Tray for Volkswagen ID.4 and ID.5\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eDesigned specifically around the centre console, the tray uses the existing card-holder slots for a secure, tool-free installation. Simply position it in place—no drilling, adhesive or permanent modification required.\u003c\/p\u003e\n\u003cp\u003eA soft interior lining provides a gentler surface for your sunglasses and other belongings.\u003c\/p\u003e\n\u003ch3\u003eWhy You'll Like It\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-specific design\u003c\/strong\u003e — made for compatible VW ID.4 and ID.5 centre consoles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUseful everyday storage\u003c\/strong\u003e — keeps sunglasses and small essentials within easy reach\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft-lined interior\u003c\/strong\u003e — provides a gentler surface for eyewear and other belongings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool-free installation\u003c\/strong\u003e — uses the existing centre-console slots\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNo adhesive or drilling required\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRegular and XL versions available\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eXL version holds two pairs of glasses and includes charging-card storage\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePETG construction\u003c\/strong\u003e — 3D printed for use inside your vehicle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the EU\u003c\/strong\u003e — designed and 3D printed by YURIK Accessories\u003c\/li\u003e\n\u003cli\u003eRegular or XL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eChoose the version that works best for you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegular\u003c\/strong\u003e\u003cbr\u003eA compact tray designed for sunglasses and other small everyday items.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXL\u003c\/strong\u003e\u003cbr\u003eProvides additional storage space for up to two pairs of glasses and includes a dedicated slot for a charging card.\u003c\/p\u003e\n\u003cp\u003eThe charging-card slot keeps an RFID charging card easy to reach when you arrive at a public charger instead of having to search through the center console or glovebox.\u003c\/p\u003e\n\u003ch3\u003eDesigned Around the VW Center Console\u003c\/h3\u003e\n\u003cp\u003eThis isn't a universal organizer adapted to fit the ID.4. The tray was designed around the existing center-console layout and uses the factory card-holder slots to locate and secure the tray. That means installation requires \u003cstrong\u003eno tools, drilling or adhesive\u003c\/strong\u003e, and the tray can be removed again when needed.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThis version is designed for:\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eEurope, Australia, Japan \u0026amp; Taiwan\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eVolkswagen ID.4 — all model years\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVolkswagen ID.5 — all model years\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVolkswagen ID.4 GTX — all model years\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVolkswagen ID.5 GTX — all model years\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eUSA \u0026amp; Canada\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eVolkswagen ID.4 — 2021–2022\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHave a 2023–2026 US\/Canadian ID.4?\u003c\/strong\u003e\u003cbr\u003eThis version does not fit your center console. See our tray designed specifically for 2023–2026 US\/Canadian ID.4 models. Click this \u003ca href=\"https:\/\/yurikaccessories.com\/products\/vw-id4-sunglasses-tray-2023-2026\"\u003elink\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstallation takes only a few moments:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eLocate the existing card-holder slots on the center console.\u003c\/li\u003e\n\u003cli\u003eAlign the tray with the slots.\u003c\/li\u003e\n\u003cli\u003eLower the tray into position.\u003c\/li\u003e\n\u003cli\u003eCheck that it is correctly seated and secure before driving.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eNo tools, drilling or adhesive are required.\u003c\/p\u003e\n\u003ch3\u003eMaterial \u0026amp; Manufacturing\u003c\/h3\u003e\n\u003cp\u003eThe tray is \u003cstrong\u003e3D printed from PETG\u003c\/strong\u003e and finished with a soft interior lining.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTray material:\u003c\/strong\u003e PETG\u003cbr\u003e\u003cstrong\u003eInterior:\u003c\/strong\u003e Soft protective lining\u003cbr\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Existing center-console slots\u003cbr\u003e\u003cstrong\u003eManufacturing method:\u003c\/strong\u003e 3D printing\u003cbr\u003e\u003cstrong\u003eDesigned by:\u003c\/strong\u003e YURIK Accessories\u003cbr\u003e\u003cstrong\u003eManufactured in:\u003c\/strong\u003e European Union\u003c\/p\u003e\n\u003cp\u003eBecause this is a 3D-printed product, minor layer lines and other surface characteristics associated with the printing process may be visible. These are normal and do not affect the intended function of the product.\u003c\/p\u003e\n\u003ch3\u003eImportant Information\u003c\/h3\u003e\n\u003cp\u003eMake sure the tray is properly seated before driving.\u003c\/p\u003e\n\u003cp\u003eDo not overload the tray or place objects in it that could interfere with vehicle controls or become hazardous during sudden braking or an accident.\u003c\/p\u003e\n\u003cp\u003eDo not use the product if it is cracked, damaged, deformed or can no longer be securely positioned.\u003c\/p\u003e\n\u003cp\u003eYURIK Accessories is an independent aftermarket-accessory manufacturer and is not affiliated with or endorsed by Volkswagen AG. Volkswagen, ID.4, ID.5 and GTX are trademarks of their respective owners and are used solely to identify vehicle compatibility.\u003c\/p\u003e","brand":"YURIK Accessories","offers":[{"title":"EU\/UK\/AUS\/NZ\/JP - 2021-2026 USA\/CAN - 2021-2022","offer_id":53455808921932,"sku":"4001","price":20.53,"currency_code":"EUR","in_stock":true},{"title":"XL size EU\/UK\/AUS\/NZ\/JP - 2021-2026 USA\/CAN - 2021-2022","offer_id":53455808889164,"sku":"XL-SUN-HLDR","price":22.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/3232\/0844\/files\/image_efffd212-6f29-49e3-a483-761583126606.png?v=1768510787"},{"product_id":"shelf-for-wireless-charger-compartment-for-vw-id4-id-5-allows-for-two-phones-in-the-compartment-3d-printed","title":"Shelf for wireless charger compartment for VW ID4, ID.5","description":"\u003cp\u003eThis shelf allows for other items to be placed in the wireless charger compartment along with the phone.\u003cbr\u003e\u003cbr\u003eThe shelf has sufficient clearance to accommodate a phone in a thick protective case and to dissipate the heat generated by wireless charging.\u003cbr\u003e\u003cbr\u003eATTENTION: FITS 2021-22 US\/CAN, and 2021-2025 European models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eDOES NOT FIT US\/CAN 2023-24\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe shelf is 3D printed from heat-resistant PETG plastic and can be ordered with or without a cushioning piece of felt on top.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"YURIK Accessories","offers":[{"title":"With felt on the top","offer_id":53455809020236,"sku":"PH-SHLF-ID4","price":12.12,"currency_code":"EUR","in_stock":true},{"title":"No felt on the top","offer_id":53455809085772,"sku":null,"price":11.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/3232\/0844\/files\/shelf-for-wireless-charger-compartment-for-vw-id4-id5-allows-for-two-phones-in-the-compartment-3d-printed-762032.jpg?v=1758869395"},{"product_id":"alignment-pad-for-airpods-for-vw-id-4","title":"Alignment pad for AirPods for 2021-2022 Volkswagen VW ID.4","description":"AirPods alignment paid secures you AirPods in the wireless compartment to assure correct position for charging. Also compatible with wireless compartment shelf.\u003cbr\u003e3D printed from heat-resistant PETG plastic\u003cbr\u003e\u003cbr\u003eModel year compatibility:\u003cbr\u003e\u003cbr\u003e2021-2022 US\/CAN models\u003cbr\u003e\u003cbr\u003e2021-2023 EU models","brand":"YURIK Accessories","offers":[{"title":"Default Title","offer_id":53455809184076,"sku":"7001","price":5.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/3232\/0844\/files\/alignment-pad-for-airpods-for-2021-2022-volkswagen-vw-id4-446672.jpg?v=1758869397"},{"product_id":"ev-charging-port-snow-cover-for-volkswagen-id-3","title":"Snow Cover for Volkswagen ID.3 and Cupra Born Charging Port","description":"\u003cp\u003eProtect the charging port from the elements while charging at home.\u003c\/p\u003e\n\u003cp\u003eOur weather cover for Volkswagen ID. 3 and Cupra Born prevent the charging handle from freezing in place in the event of freezing rain or wet snow. \u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003efully covers the charging port\u003c\/li\u003e\n\u003cli\u003eextended hood over the charging handle, maximizing protection from snow\u003c\/li\u003e\n\u003cli\u003esliding lock securing the cover in place\u003c\/li\u003e\n\u003cli\u003eA window to check the charging status with transparent cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eSHIPPING after Feb 5th\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"YURIK Accessories","offers":[{"title":"Default Title","offer_id":56576787841356,"sku":"ID3-SNW-CVR","price":27.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/3232\/0844\/files\/ID.3SNOWcoverv1.png?v=1769464974"},{"product_id":"vw-id4-sunglasses-tray-2023-2026","title":"Sunglasses \u0026 Small-Item Tray for VW ID.4 (2023–2026 US\/Canada)","description":"\u003cp class=\"ds-markdown-paragraph\"\u003e \u003c\/p\u003e\n\u003ch2\u003ePut That Unused Space to Work\u003c\/h2\u003e\n\u003cp\u003eKeep your sunglasses and everyday essentials within easy reach with the \u003cstrong\u003eYURIK Sunglasses \u0026amp; Small-Item Tray\u003c\/strong\u003e, designed specifically for 2023–2026 US and Canadian Volkswagen ID.4 models.\u003c\/p\u003e\n\u003cp\u003eThe tray adds useful storage above the center console without requiring drilling or permanent modification. A soft lining provides a more protective surface for sunglasses, while the tray is also useful for other small items you want to keep close at hand.\u003c\/p\u003e\n\u003ch3\u003eWhy You'll Like It\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned specifically for the VW ID.4\u003c\/strong\u003e — shaped for 2023–2026 US and Canadian models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConvenient everyday storage\u003c\/strong\u003e — ideal for sunglasses and other small items\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eCan hold two pairs of sunglasses\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft-lined interior\u003c\/strong\u003e — provides a gentler surface for eyewear and other belongings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure installation\u003c\/strong\u003e — attaches to the centre console using double-sided adhesive\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNo drilling or tools required\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePETG construction\u003c\/strong\u003e — 3D printed for use inside your vehicle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the EU\u003c\/strong\u003e — designed and 3D printed by YURIK Accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMade for Everyday Convenience\u003c\/h3\u003e\n\u003cp\u003eThe ID.4 has plenty of interior space, but small everyday items don't always have an obvious place to go.\u003c\/p\u003e\n\u003cp\u003eThis tray turns otherwise unused space around the centre console into convenient storage for items such as sunglasses, keys, coins or other small belongings.\u003c\/p\u003e\n\u003cp\u003eIts open design keeps frequently used items easy to see and reach.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eDesigned specifically for:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVolkswagen ID.4 — US and Canadian models, model years 2023–2026\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis version is designed for the centre-console configuration used in these vehicles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHave a 2021–2022 US\/Canadian ID.4 or European ID.4\/ID.5?\u003c\/strong\u003e\u003cbr\u003eSee our tray designed for that center-console configuration. Click the \u003ca href=\"https:\/\/yurikaccessories.com\/products\/vw-id4-id5-sunglasses-tray\"\u003elink\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eNo drilling or tools are required.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eClean and dry the mounting area on the centre console.\u003c\/li\u003e\n\u003cli\u003eCheck the tray position before removing the adhesive backing.\u003c\/li\u003e\n\u003cli\u003eRemove the backing from the double-sided adhesive.\u003c\/li\u003e\n\u003cli\u003ePosition the tray carefully and press it firmly into place.\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAllow the adhesive to establish a secure bond before placing items in the tray.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFor best adhesion, install the tray on a clean, dry surface.\u003c\/p\u003e\n\u003ch3\u003eMaterial \u0026amp; Manufacturing\u003c\/h3\u003e\n\u003cp\u003eThe tray is \u003cstrong\u003e3D printed from PETG\u003c\/strong\u003e and finished with a soft interior lining.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTray material:\u003c\/strong\u003e PETG\u003cbr\u003e\u003cstrong\u003eInterior:\u003c\/strong\u003e Soft protective lining\u003cbr\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Double-sided adhesive\u003cbr\u003e\u003cstrong\u003eManufacturing method:\u003c\/strong\u003e 3D printing\u003cbr\u003e\u003cstrong\u003eDesigned by:\u003c\/strong\u003e YURIK Accessories\u003cbr\u003e\u003cstrong\u003eManufactured in:\u003c\/strong\u003e European Union\u003c\/p\u003e\n\u003cp\u003eBecause this is a 3D-printed product, minor layer lines and other surface characteristics associated with the printing process may be visible. These are normal and do not affect the intended function of the product.\u003c\/p\u003e\n\u003ch3\u003eImportant Information\u003c\/h3\u003e\n\u003cp\u003eInstall the tray only in the intended position and make sure it is securely attached before driving.\u003c\/p\u003e\n\u003cp\u003eDo not overload the tray or place objects in it that could interfere with vehicle controls or become hazardous during sudden braking or an accident.\u003c\/p\u003e\n\u003cp\u003eDo not use the product if it is cracked, damaged, deformed or no longer securely attached.\u003c\/p\u003e\n\u003cp\u003eYURIK Accessories is an independent aftermarket-accessory manufacturer and is not affiliated with or endorsed by Volkswagen AG. Volkswagen and ID.4 are trademarks of their respective owners and are used solely to identify vehicle compatibility.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"YURIK Accessories","offers":[{"title":"Default Title","offer_id":58706928927052,"sku":"SUNGL-US-ID4","price":20.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/3232\/0844\/files\/rn-image_picker_lib_temp_402c34a0-609b-4781-89dd-56bc2753fb24.jpg?v=1789051074"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/3232\/0844\/collections\/made-it-circle.png?v=1763143277","url":"https:\/\/yurikaccessories.com\/nb\/collections\/vw-id-4-id-5-products.oembed","provider":"YURIK Accessories","version":"1.0","type":"link"}